Application

BORPower^® is a nano lubricant additive for all 4-stroke gasoline, gas and diesel engines as long as they satisfy the common ACEA and API standards. BORPower^® does not apply to 2-stroke motors due to the mixed or fresh oil lubrication used there.

One BORPower^® S-600 bottle contains enough additive from 5 to 18 liters of motor oil.

 
        Detailed instructions

1. Renew the motor oil and the oil filter.
2. After completing the oil change, start the motor and warm it up for about 20 minutes.
3. Shake the BORPower^® bottle well for at least 3 minutes to assure that the nanoparticles dispense properly.
4. Shut down motor and fill required amount of BORPower^® into motor oil inlet.
5. After application, drive the vehicle for at least 25 km or let the engine run for 25 minutes.

BORPower^® takes several hours of driving time after application to become effective to a full extend. BORPower^® takes effect up to a motor mileage of 60.000km after application. This holds as well if the motor oil or the oil filter are replaced earlier.

BORPower^® was tested successfully with turbo-charged motors. It does not damage or diminish the function of catalytic converters and is compatible to all mineral and synthetic oils on the market as long as they satisfy the technical specification of the manufacturer. BORPower^® can be disposed at every oil change together with the waste oil.